There are three key ways to improve the energy density of lithium batteries:
1, add the specific capacity of the rechargeable battery;
2, increase the operating voltage of the rechargeable battery.
3. The operating frequency of positive electrode materials for batteries tends to be higher. In order to complete the management system of high-voltage rechargeable batteries, electrolysis of lithium batteries is particularly important. It is not only necessary to consider the higher requirements of positive levels for air oxidation resistance, but also to consider the rules that can be converted to negative levels of stability.
In order to increase the energy density of lithium batteries, it is necessary to increase the share of positive and negative active materials in lithium batteries. Lithium batteries are composed of positive and negative active materials, diaphragms, copper, platinum, and aluminum masks. It is the most effective way to increase the share of active materials in lithium batteries.
In addition to expanding lithium batteries, a reasonable way to improve the energy density of lithium batteries is to reduce the thickness of the film. Many lithium battery manufacturers have widely used films containing films. The thickness of the film can be less than 20 microns, which can ensure the safety of lithium batteries. Under the premise, the volume ratio of the film is greatly reduced, the occupancy rate of active materials is added, and the energy density of the lithium battery is improved.
In addition, one way to increase the share of active materials is based on the viewpoint of the production process of rechargeable batteries. One is to increase the share of active materials in the power level. In order to add the share of active materials, it is necessary to reduce the share of active materials, and reduce the share of inactive materials according to the selection of new conductive agents and adhesives and the reduction of the shares of conductive agents and adhesives. Second, it is necessary to add positive and negative sizing amounts.
The use of 3c lithium has improved the specific energy, and the use of 3c lithium power supply should also pay attention to its detection, which is closely related to its characteristics. Therefore, it is necessary to select a suitable contact group for current conduction and data signal transmission. The stretched spring micro-needle beautiful touch panel can be used for 3c lithium battery detection. It can print for a long time when transmitting large currents. The continuous needle of the lubricating needle has excellent characteristics. The average use cycle is more than 20w. It should be a 3c lithium battery high-frequency detection, which can last for a long time. Stable touch with time, improve detection power.